How to Waterproof Shoes at Home With a Candle: Step-by-Step Guide

By Pratik Kumar, ZenByte. Updated 4 November 2026. Reading time: about 4 minutes.

Quick answer: To make shoes water-resistant at home, rub a plain candle over clean, dry leather or canvas shoes, warm the wax with a hairdryer on low heat, then buff off the extra wax and test with a few drops of water.
Key takeaways
  • It takes about ten minutes with a candle, a hairdryer and a cloth.
  • Works best on leather and canvas; avoid suede, nubuck and mesh.
  • Use low heat so glue and materials do not get damaged.
  • Reapply every few weeks in heavy rain, or use a spray for longer protection.

Monsoon season is hard on shoes. Wet streets soak leather and canvas, colours fade and soles start to peel. A popular home trick uses just a candle and a hairdryer to give shoes a thin water-resistant layer. It takes about ten minutes. Here is how it works, what it suits and when to choose something else.

Heads up: This adds water resistance, not full waterproofing. It works best on leather and canvas. Always test a small hidden spot first.

What you need

  • A plain candle (paraffin or beeswax, without strong dye or scent).
  • A hairdryer.
  • A soft cloth and an old brush.
  • Newspaper to protect your floor.

How to waterproof shoes with a candle

Five steps, about ten minutesFigure 1: The candle and hairdryer method.
  1. Clean and dry the shoes. Remove dust and mud with a brush and let them dry completely.
  2. Rub the candle over the surface. Use even strokes and cover the whole upper, paying extra attention to seams, stitching and the area where the sole meets the shoe.
  3. Warm the wax with a hairdryer on a low or medium setting, holding it a hand-span away. The wax melts and soaks into the material.
  4. Buff the surface with a soft cloth to remove any extra wax.
  5. Test it. Sprinkle a few drops of water. If they bead up and roll off, the shoes are ready.

Which shoes suit this method?

Shoe materialSuitable?Notes
Smooth leatherYesMay darken slightly, so test first
CanvasYesWorks well on sneakers
Suede or nubuckNoWax can ruin the texture; use a special spray
Mesh or knitNoWax can clog the fabric and reduce breathability
Shoes with glued solesBe carefulToo much heat can weaken glue; keep the dryer on low
How long each step takes (minutes, approximate)Figure 2: Roughly ten minutes for a pair.

Safer and longer-lasting alternatives

  • Use a waterproofing spray made for your shoe material, available at shoe shops.
  • Use a leather wax or beeswax-based waterproofer for leather boots.
  • Choose shoes with a rubber sole and water-resistant upper for the rainy season.

Monsoon shoe care tips

  • Stuff wet shoes with newspaper and dry them in a shaded, airy place. Avoid direct sun or heaters.
  • Rotate between two pairs so each pair can dry fully.
  • Reapply the wax coating every few weeks during heavy rain.
  • Wipe off mud soon after you come home.
  • Keep a spare pair of socks in your bag.
Safety: Keep the hairdryer moving, never heat one spot for long and stay away from flames while handling the candle.

Frequently asked questions

Can you waterproof shoes with a candle?

Yes, a candle wax coating can make leather and canvas shoes water-resistant. It adds water resistance rather than full waterproofing, so reapply it regularly.

What type of candle should I use?

A plain paraffin or beeswax candle without strong dye or scent works best.

Does candle wax damage shoes?

It can darken some materials and ruin suede, nubuck and mesh, so test on a hidden spot and avoid those materials.

How often should I reapply the wax?

Every few weeks during heavy rain, or whenever water stops beading on the surface.

Keep reading

Comments

Like ZenByte? There's more on OutOfBoxxi.Free tools, daily reads and an anonymous wall to share what you feel.
Go to OutOfBoxxi ↗